High Pressure Blower Anti-Corrosion Measures

High-pressure blowers used in chemical raw materials for a long time, corrosion problems often occur. Here are some recommended measures to prevent or slow down the blower corrosion. 

  • It is very important to choose the right material of the Because of different materials and separation requirements, different models need to be selected.

  • The mechanism design of the blower. The design can prolong the service life of the equipment and ensure the safety of the equipment.  

  • Surface protection. A basic idea to control corrosion is to isolate the corrosive environment. In the design of blower, surface treatment methods are often used, such as flanges, galvanizing, chrome plating, chemical plating, etc. These methods are effective in many environments. But for rotating parts, we must pay attention to an important phenomenon: the base material and the coating are two materials, and their linear expansion coefficients are different, which will produce a different amount of deformation when the rotating part is elastically deformed, which will cause a large number of micro-cracks. If the mentioned phenomenon exists, it will accelerate the formation of corrosion. Therefore, the surface protection methods for rotating parts should be used with caution.

Subscribe to receive more articles about pump and vacuum industry.

 

Leave a comment

Please note, comments must be approved before they are published